XY LIGHTING LIMITED : Wholesale Luminaires Manufacturer
1. Solar street lights can't leave the sun when working. Please choose the appropriate product model according to the sunshine intensity of the installation site, the total annual solar radiation, the height of the lamp post, etc. In areas with insufficient sunlight or continuous rainy days, the working hours of solar road lamps will be shortened or not bright.
2. The solar street lamp chooses a long-life lithium battery as the energy storage device. The discharge condition at night is -25 ℃ ~ + 65 ℃. If it exceeds this range, it will destroy the performance of the battery. When selecting "integrated solar street lamp", please confirm the extreme temperature The above conditions will not be exceeded. The battery of the integrated solar street lamp can be stored for a maximum of six months after being fully charged. If it is transported or stored for a long time, it needs to be checked in time, charged and recorded regularly, otherwise the battery will be damaged.
4. When installing the integrated solar street light, try to make the solar panel face the direction of the sun to obtain the maximum energy. At the same time, it is necessary to avoid the shadows of obstacles such as houses and trees, otherwise it will reduce the power generation efficiency of the solar panel, resulting in the shortening of the lighting time of street lamps.
5. There should be no direct light source above the solar panel, so as to avoid misidentification of the lamp control system and lead to misoperation; there should be no other facilities (such as cables, pipes, etc.) below the installation position of the solar energy street lamp; solar lamps should be avoided as close to the heat source as possible Prevent impact on lamp life;
6. The cleanliness of the surface of the solar panel will also affect the power generation efficiency of the solar panel, so its surface (such as ash leaves, oil stains, etc.) needs to be cleaned, it is recommended to regularly wash with ordinary detergent.
7. All the internal components of the integrated solar street lamp body are well waterproofed and have reached IP65 standard. The heat dissipation holes and slits of the shell are specially designed for heat dissipation and drainage. The metal parts are made of aluminum alloy suitable for outdoor environment.
1.The solar controller is the core component of the solar street lamp.It has many functions such as light control, time control, charging, and discharge.It should be kept dry during use.Do not touch each button at will.If there is a malfunction, it must be operated by professionals;
2. The solar panel is the component with the longest service life in the solar street lamp.It can be used for a maximum of 25 years.When it is used for many days without rain, a large amount of soil dust falls on the surface of the panel, which affects the power generation efficiency. Manual cleaning should be carried out, keeping the direction of the solar panel facing south, if there is any swing, it should be corrected in time.
3. The LED light source has a long service life, and the general failure rate is extremely low. The entire light source should be cleaned regularly to avoid electricity and reduce the brightness of the lamp.
4. The energy storage battery pack itself has a certain self-discharge. When the integrated solar street lamp is not used for a long time, please take out the lamp regularly and charge it in the sun.
XY Lighting Limited is solar street light manufacturer provides solar led street light,street lamp,outdoor street light,solar ilumination, solar streetlight, solar powered lights,chinese solar lights for gardens,garden flag pole with solar light,garden solar lights,outdoor solar street lamp,all in one solar street light,solar garden light etc. Contact us now for more information.
Contact us now